Adjustable Round Hole Cutter, 2.2"-10", AHC-10
The Jonard Tools AHC-10 adjustable hole cutter is designed for cutting round holes in ceilings, walls, and floors and is the perfect tool for installing recessed speakers, lighting, or other round objects.
This adjustable hole cutter features the following:
This adjustable hole cutter features the following:
- Cuts plywood, sheetrock, plasterboard, and acrylic sheet up to 1 1/16” (2.7 cm) thick
- Cutting depth is adjustable via hex locknut and compression spring
- Cuts hole sizes from 2.2” (55 mm) to 10” (254 mm)
- Polycarbonate transparent dust shield collects dust and prevents chips from flying into eyes while cutting
- Rubber gasket provides surface protection against damage, tight seal against flat surfaces, and prevents fallout from debris
- Compression spring absorbs vibrations while cutting
- Can be used with any variable-speed drill
- Includes rugged carry case
- Power drill not included with hole cutter
Cut Type
Round Hole
Works On
Plywood, Sheetrock, Plasterboard, Acrylic Sheet
Cutting Diameter Range
2.2"-10" (56 mm-256 mm)
Maximum Cutting Depth
1.1" (27 mm)
Bit Diameter
0.236” (6.0 mm)
Bit Length
1.70” (43.27 mm)
Bit Material
Steel
Hex Chuck Size/Arbor Size
3/8" (9.53 mm)
Dimensions
13.5" x 4.6" x 14.1" (342 mm x 118 mm x 360 mm)
Weight
2.53 lb (1.147 kg)
Round Hole
Works On
Plywood, Sheetrock, Plasterboard, Acrylic Sheet
Cutting Diameter Range
2.2"-10" (56 mm-256 mm)
Maximum Cutting Depth
1.1" (27 mm)
Bit Diameter
0.236” (6.0 mm)
Bit Length
1.70” (43.27 mm)
Bit Material
Steel
Hex Chuck Size/Arbor Size
3/8" (9.53 mm)
Dimensions
13.5" x 4.6" x 14.1" (342 mm x 118 mm x 360 mm)
Weight
2.53 lb (1.147 kg)